« | »


Top 50 Data Structures Interview Questions and Answers

Last modified about 3 years ago by . Posted in School News |

Top 50 Data Structures Interview Questions and Answers.

Data Structures interview can be very technical and there are many topics to cover. During an interview of such, any question can be asked and, of course, the way you reply to these questions determine how you are rated by the interviewer.

Most of these data structures interview questions are repeated during interview and we had compiled and answered these questions just to aid you scale through an interview.

Below are the top 50 data structures interview questions & answers. While taking note of them do well to also take note of the reoccurring words or phrases being used.

1. What’s Data structure?

Data structure refers to the manner in which data is arranged and worked on which basically involves looking for ways to make data more interrelated and accessible.

2. Differentiate between file structure and storage structure

File structure is an auxiliary structure while storage structure can be found on the computer system’s main memory.

3. What’s the best time to apply binary search?

When elements to be searched are already arranged is when binary search is best applied. It would basically split in two beginning from the middle mark and searching either way.

4. Explain what a linked list is

A linked list is a chain of nodes connected in successive order to form a data storage.

5. In a one-dimension array how can all elements be referenced?

An indexed loop is used to reference all of the elements in a one -dimension array in such an arrangement in which the counter runs from zero to the array size minus one which would in turn help to reference the elements in sequence by ordering the loop counter because the array subscript.

6. Data structures are used in what areas?

Once data is involved in any area, data structures are useful. In general, algorithms that involve economical organization is applied within the following areas: numerical analysis, OS, A.I., compiler style, management, graphics, and applied math analysis and so much more?

7. What’s LIFO?

LIFO is the acronym for “Last In initial Out” which has to do with the storage, retrieval and accessibility of data. What this means is, the data you stored last would be the first to be retrieved and vice versa.

8. What’s a queue?

A queue is a data structure which imitates a list which basically entails addition of elements while the old elements are removed from on end

9. What are binary trees?

A binary tree has 2 nodes, a left node, and a right node. In programming, binary trees are continuations of coupled list structures.

10. To manage an algorithmic function, what data structures are used?

Recursion is a data structure used to manage an algorithmic function as it is used the stack based on a terminating condition.

11. What’s a stack?

A data structure in which only the top element can be retrieved is called a stack.

12. Make a case for Binary Search Tree

A binary search tree is one of the best ways of storing and accessing data easily.  It contains a right and a left subtree.

13. What are multi-dimensional arrays about?

When storing data such as data representation which can’t be contained in a single dimensional array and need to be put in a multiple columns, multi-dimensional arrays are needed.

14. Would you consider data structures which are linked lists linear or non-linear?

It depends on wherever you propose to use coupled lists. If you primarily based it on storage, a coupled list is taken into account non-linear. On the opposite hand, if you primarily based it on access methods, then a coupled list is taken into account linear.

15. Explain the ways in which dynamic memory allocation can be used in managing data?

Apart from having the ability to store  data structures which aren’t complex, dynamic memory allocation will mix singly allotted structured blocks to create composite structures that expand and contract as required.

16. What’s FIFO?

FIFO stands for First-in, First-out, and is employed to represent the ways data can be retrieve when in a queue.

17. What’s an ordered list?

An ordered list could be a list during which every node’s position within the list is decided by the worth of its key part, so the key values are arranged in order of increasing sequence, because the list is traversed.

18. What’s merge sort?

In a merge sort, data which are adjacent to each other are linked or joined to form sorted lists which are larger.

19. Differentiate NULL and VOID

Null indicates the worth or value of a thing while;

Void is a type of data identifier.

20. What’s the basic advantage of a linked list?

The basic advantage of a linked list is that it can be easily edited and changed as required.

21. What’s the major distinction between a PUSH and a POP?

Push refers to the way data is added to a stack while;

Pop refers to the way data is being accessed or retrieved in a stack.

22. What’s a linear search?

A linear search refers to the manner a target secret’s being searched in a very ordered organization. during this technique, every part within the list is checked and compared against the target key. the method is recurrent till found or if the tip of the file has been reached.

23. Variable declaration has an effect on memory allocation in what way?

The amount of memory to be allotted or reserved would rely basically on the type of data contained in the variable being declared.

24. What’s the advantage of the heap over a stack?

In a heap, can be alternately assigned and re-assigned as needed which makes it more flexible that the stack.

25. What’s a postfix expression?

An expression in which each operator follows its operand is called a “postfix expression”.

26. What’s Data abstraction?

A Data abstraction is a strong tool which is used for dissecting and breaking data problems into smaller forms which can be easier worked on.

27. Explain how you can add new items in a binary search tree?

Check if the search tree is empty and if so, just add the new item in the root note. Consequently, if it the binary search tree isn’t empty, insert it in the left subtree or right subtree of the root.

28. A selection sort works for an array in what ways?

A selection sort is a process in which repeatedly the smallest element left in a subarray is located to the first subscript through node 1and replace with the element which is at the first subscript.

29. In what ways do signed and unsigned numbers have an effect on memory?

In the case of signed numbers, the primary bit is employed to point whether or not positive or negative, that leaves you with one bit short. With unsigned numbers, you’ve got all bits offered for that range. The impact is best seen within the range vary (an unsigned 8-bit range encompasses a vary 0-255, whereas the 8-bit signed range encompasses a vary -128 to +127.

30. What’s the least number of nodes that a binary tree will have?

A binary tree will have a minimum of zero nodes, that happens once the nodes have NULL values. Also, a binary tree also can have one or a pair of nodes.

31. Dynamic data structures are what?

Any data structure which increases or decreases as a program is running and provide an easy way of changing data is a Dynamic data structure.

32. Pointers are employed in what data structures?

Pointers are employed in data structures such as Stack, Queue, Binary Tree and Linked List.

33. Do all declaration statements end in a fixed reservation in memory?

Except pointers, all other declarations end in a fixed reservation in memory.

34. Arrays are what?

Any variable which has a number of indexed elements is called an Array.

35. What’s the minimum range of queues required to implement a priority queue?

The minimum range of queues required to implement a priority queue is two.

36. What sorting algorithmic is taken into account as the fastest?

Of all the sorting algorithms none can be said to be the fastest as everyone one of them is structured to tackle a particular type of problem.

37. Differentiate STACK from ARRAY

Stack follows a LIFO pattern. It implies that data retrieval follows a sequence whereby the last information to be keep once the primary one to be extracted while; Arrays do not follow a specific order and instead are often retrieved by indicating the indexed part at intervals the array.

38. Provide a basic formula used to search in a binary search tree

  • If the tree is empty, then the target isn’t within the tree, end search
  • If the tree isn’t empty, the target is within the tree
  • Check if the target is within the root item
  • If a target isn’t within the root item, check if a target is smaller than the root’s price
  • If a target is smaller than the root’s price, search the left subtree
  • Else, search the proper subtree

39. What’s a dequeue?

A dequeue is a queue which has double ends and in which elements can be added and removed from any of the ends.

40. What’s a bubble sort and in what way does it get performed or done?

A bubble sort is a sorting technique that may be applied to data structures one of which could be an array. It is done by comparing adjacent parts and exchanging their values if they’re out of order.

41. What are the elements of a linked list?

A linked list usually has 2 parts or elements: the head and also the tail.  The node is in between the head and the tail.

42. Selection sort works in what ways?

Selection kind works by selecting the littlest range from the list and putting it at the front. This method is recurrent for the second position towards the tip of the list. 43)

43. What’s a graph?

A graph is one style of organization that contains a collection of ordered pairs. These ordered pairs  can be called edges or arcs and are accustomed connect nodes wherever data is saved and retrieved.

44. Differentiate linear from a nonlinear organization

In Linear data structure, data elements are situated adjacent to one another. While; In a Non-Linear data structure, data elements are linked to two or more elements which are adjacent to each other.

45. What’s an AVL tree?

An AVL tree a binary search tree which is always partially and was the first to be designed as such.

46. What are doubly linked lists?

Doubly linked lists are linked lists in which traversal across data elements can be done in both direction one direction at a time.

47. What’s Huffman’s algorithm?

Huffman’s algorithm is employed for making extended binary trees that have minimum weighted path lengths from the given weights

48. What’s Fibonacci search?

Fibonacci search is a search algorithm which uses the divide and conquer method to reduce search time in a sorted array.

49. In summary, explain what a recursive algorithm is about

Recursive algorithm  solves a problem by dividing it into smaller, manageable sub-problems. The output of one formula when processing one sub-problem becomes the input to solve the next sub-problem.

50. Target key is searched for in a linked list in what way?

In a linked list, to search for a target key, sequential search method has to be applied. Traversal is continued until a target key or last note is found or reached by traversing and comparing a target key.

What’s your take on this? We believe this article was interesting right, if yes, don’t hesitate using our share button below to inform – friends and relation via Facebook, twitter or Google+.

NG Team.

Tags: , , , , ,

COMMENT SECTION
Plse, Don't just read and leave, Pls drop a comment below!

0 Responses

Leave a Reply

Name:

Message:

« | »


© 2015 Naijagreen